DIY Modern Arrow Wall Art

Arrows have been associated with many symbols ranging from love (as with Cupid's bow and arrow), to swiftness, power, flight and direction. Crossing arrows together can also be a symbol of strength and friendship — where one single arrow can easily be broken, a bundle of arrows is more difficult to break. Whatever meaning they have for you, these DIY arrows are sure to be a stylish and modern addition to your wall decor.

Copper arrows wall art

Video of the Day

Copper arrows wall art

Things You\’ll Need

  • Arrow template

  • Fletching template

  • Aluminum sheet

  • Scissors or snipping shears

  • Utility knife

  • Ruler

  • Pliers

  • Hot glue gun

  • 3-inch-by-1/4-inch wooden dowels cut to 2 1/2 feet (3)

  • Cutting board or self healing cutting mat

  • Wire

  • Gloves

  • Copper or gold spray paint

Materials needed


Arrows and fletching measure approximately 5 inches and dowels measure 2 1/2 feet.

Step 1

Download, print and cut out the arrow template. Use the template to trace a triangle onto the aluminum sheet, and then use snipping shears or scissors to cut it out. Use your ruler and utility knife to score around the triangle, about 1/4 inch from the edges.

Aluminum triangle

Step 2

In each corner, cut "notches" at each point where the lines meet.

Cut at each end

Step 3

Using pliers, fold the scored lines back towards the back of the triangle.

Fold back aluminum Underside of triangle

Step 4

Cut a slit large enough for the dowel to feed through at the bottom edge of the triangle. Bend the flap upward.

Cut a slit in the middle

Step 5

Gently bend the triangle vertically through the center so it curves.

Bent triangle

Step 6

Using a hot glue gun, lift the flap you made in Step 4 and place a generous amount of hot glue on the top portion of a wooden dowel. Stick the dowel onto the underside of the triangle and close the flap over it.

Glued dowel Front view of arrow

Step 7

Download the fletching template here. Trace around the template with a pencil onto the aluminum sheet, and cut out the fletching with scissors or snipping shears. With your utility knife, score the outline and several diagonal lines on either side that meet in the center.

NOTE: Lines drawn with a marker for photography/tutorial purposes only.

Marked fletching Scored fletching

Step 8

Using pliers, fold the edges of the fletching back.

Underside of fletching

Step 9

Bend the fletching in the middle, towards the back, to give it dimension.

Bent fletching

Step 10

Use generous amounts of hot glue to attach the other end of the dowel to the fletching.

Attached fletching

Step 11

Repeat Steps 1 through 11 to make two additional arrows and fletchings. Place three arrows together and separate them to your desired distance. Wrap wire around the three dowels to secure them together.

Wrap together with wire

Step 12

Use a piece of wire to make a loop for hanging.

Wire loop to hang

Step 13

Spray paint the three joined arrows using gold or copper spray paint and allow to dry before hanging.

Arrow art completed