Propagating a Persimmon by Stem Cuttings

Things You\’ll Need

  • Shears sanitized with rubbing alcohol

  • Crushed perlite

  • Crushed vermiculite

  • Pot, 6-inch diameter, with drainage holes

  • Rooting hormone

  • Clean cardboard or wooden box

  • Spray bottle

  • Clear plastic sheeting or panel

  • Grow lights

  • Gardening thermometer

Persimmons on a tree Persimmon propagation has approximately a 90-percent chance of failure. Image Credit: Hemera Technologies/ Images

Persimmon refers to a family of trees that produce edible fruit ranging in color from yellow to red. The seeds of the fruit are viable, but they do not produce offspring identical to the parent tree. To propagate a persimmon with results identical to the parent tree, you must take either a root or stem cutting. Root cuttings are the most viable, but you can propagate a persimmon by stem cuttings if it's your only option. For the best chance of success, try propagating a persimmon with as many stem cuttings as possible, as a high percentage are likely to fail.

Video of the Day

Step 1

Take the persimmon cuttings from young stems in late fall. This yields the best chance of success, as the stems are least likely to mold. Use sanitized shears to reduce the chance of infection. The cuttings should be about 6 inches long and 1/4-inch wide. Take 10 cuttings for every started persimmon you would like.

Step 2

Combine equal amounts of crushed perlite and vermiculite in one pot for each cutting you took, stopping 1 inch from the top. Mix the potting compounds evenly. Dip the cut end of each persimmon stem in a rooting hormone and poke each in the center of an individual pot, about 2 inches deep in the perlite and vermiculite compound.

Step 3

Place the pots containing the persimmons in a cardboard or wooden box large enough to hold all of them. Use multiple boxes if necessary. The sides of the box should be approximately 18 inches high. Fill a spray bottle with warm water, at least 90 degrees Fahrenheit, and mist the persimmon cuttings until dampened. Cover the box with clear plastic sheeting or paneling. The clear covering should keep moisture within the box.

Step 4

Position grow lights above the clear plastic covering, about 6 inches away, spacing them 8 inches apart. Keep the grow lights on for 12 hours a day. The temperature within the box should stay between 75 and 90 degrees Fahrenheit day and night. Place a thermometer inside the box to keep track of the temperature. Move the lights farther away if the temperature is too high; if it's too low, move them closer. Keep the box in a warm area indoors to help maintain the temperature.

Step 5

Mist the persimmon cuttings once every 10 days with 90-degree water. Misting them more often might encourage mold growth. Remove any moldy persimmon cuttings from the box to prevent spreading spores to unaffected cuttings. Continue this process for about three months.

Step 6

Remove the plastic covering from the persimmons for 30 minutes per day, and increase the frequency of misting to once every three days. Care for the persimmons in this manner for approximately three months. Increase the time without the plastic by 30 minutes every five days during these three months. Remove cuttings that die during the exposure process; the persimmons that remain successfully took root and survived the propagation process.

Step 7

Take the remaining persimmons out of the box and plant them in the ground. Each species of persimmon requires different planting depth, plant spacing, fertilization and care. Speak with a representative at your local nursery for specific in-ground planting and care instructions.


All of the required supplies to propagate a persimmon by stem cuttings should be available from a local gardening store.