Things You\’ll Need
For each cushion:
High density foam (2" thick, 15" x 17")
21" x 35" outdoor canvas (for cover)
2 pieces of 3" x 16" outdoor canvas (for ties)
Cardstock or cardboard for pattern
DIY Chair CushionNici Holt Cline
Outdoor furniture is sturdy, made to tolerate weather and much use. Sometimes patio chairs could use a little boost in the comfort department. With all of the shared meals and moonlight conversations happening around your patio table this summer, why not spiff up your seats? It takes only a bit of time and creativity to make your own patio seat cushions. Your neighbors and your back will thank you!
Video of the Day
Draw the Shape You Will CutNici Holt Cline
Place the foam on your chair and trace the basic shape of the chair seat. Using sharp scissors, shape the corners. After cutting one cushion, use it as a pattern for the others by placing the cut cushion atop the uncut cushion and tracing with a marker. Try to make each cushion the same shape. (High density foam is sold in sheets that can be cut down, as well as in pre-cut sizes. Save time and mess by purchasing pre-cut 15" x 17" rectangles.)
Cut Foam Away With ScissorsNici Holt Cline
If your chair back is slightly rounded, simply snip the back corners at a 45 degree angle. Mark your cushion back with a dot to make it easier later.
Cut Fabric to SizeNici Holt Cline
Cut outdoor canvas fabric to size. If the suggested amount of canvas listed above doesn't work for your chair seat, use this math: chair cushion width + 4 inches; chair cushion length x 2 + 5 inches
Get Ready to SewNici Holt Cline
Fold canvas in half, right sides together, making a 21" x 17.5" rectangle. The folded edge will the be front of your cushion cover. Because the front corners of the foam are rounded, you will also need to round the front corners of the cover.
Mark Rounded CornersNici Holt Cline
To make rounded corners, make a simple pattern out of cardstock. Tracing the edge of a plate makes a perfect arc. Then trace the pattern on the front corners of the cover.
Stitch Up SidesNici Holt Cline
Using a 1/2" seam allowance, stitch up the side of the cover and around the curve you just traced. Repeat on the other side.
Turn and Insert FoamNici Holt Cline
Turn cover. Insert foam, using the dot as a quick reference for which end goes in first. The cover should be very snug.
Fold Ends Like A Present and PinNici Holt Cline
Fold the open end like wrapping a gift and safety pin in place.
Whip Stitch ClosedNici Holt Cline
Using a needle and thread, whip stitch the opening together. Remove safety pins.
Make Chair TiesNici Holt Cline
To make the ties, fold each piece of the canvas tie fabric in half, lengthwise with right sides together. Using the sewing machine, stitch one short side and the long side together. Turn. It can be tricky to turn a small item like this; use a chopstick or marker to assist. Tuck ends in and stitch closed.
Attach TiesNici Holt Cline
Using a needle and thread, attach ties to back of cushion at the corners.
AaaaaahNici Holt Cline
Tie to your chair and have a seat!