# How to Determine Slat Spacing

#### Things You\’ll Need

• Slats

• Tape measure

• Wood block

Slats should be close enough so a child can not fit their head between them.

Slats are found on railings, fences, and various pieces of furniture. To achieve the best aesthetic results when working on any of those projects you need to properly space the slats. Determining the spacing between slats requires just a few tools and some math skills, but once you determine how far apart you want the slats to be for your project, all you have to do to install them is hammer a few nails or drive some screws into place.

Video of the Day

## Step 1

Measure the distance between the two posts where you will be installing the slats. Write down, or remember, this measurement.

## Step 2

Decide how many slats you will be installing. Consider that the building code in most places calls for the distance between slats on railings to be no farther than 4 inches apart. If you are installing the slats on something other than a railing feel free to vary the distances.

## Step 3

Measure the width of a slat and add that measurement to the measurement of the span between the two posts.

## Step 4

Divide your new measurement by one plus the total number of slats. For example, if you are putting six slats in a span, divide by seven in your calculations. This will give you the distance from the edge of the post to the opposite side of the slat first slat.

## Step 5

Find the distance between the slats by subtracting the width of the slat from the previous measurement. This distance is the space between each slat for equal spacing.

## Step 6

Cut a wood block the length needed for equal spacing and use the block as a spacer to install the slats.

#### Tip

If you have a predetermined distance for a space, simply cut a block as a spacer to put between the slats during installation.