Phone Charging Station DIY (Using a Plastic Bottle)

Let's face it, our phones have become a fun, creative and integral part of our daily lives. We don't just communicate with them anymore, we also create, manage our time and finances, work, and play on them. But along with having information at our fingertips 24/7, those jumbled up charging cords can become such a mess. To minimize cord clutter, why not upcycle a plastic bottle into a stylish phone charging station. It can be made with things you most likely already have around the house. All you need is an empty plastic bottle, a little fabric, and some glue to make this environmentally friendly project.

Finished phone charging station

Things You\’ll Need

  • Plastic bottle (lotion, shampoo, or dish soap)

  • Marking pen

  • X-acto knife

  • White glue

  • Foam brush

  • Sharp scissors

materials needed for phone charging station

Step 1

Peel the labels from the bottle.


If your bottle doesn't have a label and the writing is printed on the bottle, try rubbing fingernail polish remover directly onto the writing to remove it.

peel label

Step 2

Draw the cutting lines. Draw a straight line across the front and a boxed shape tab on the back. Use your phone to determine where you'd like to cut the bottle.

draw cutting lines

Step 3

Use an X-acto knife to cut the bottle along the lines. If parts of the lines are still showing, you can remove them with fingernail polish remover.

cut along lines

Step 4

Draw an opening on the boxed shape tab on the back of the plastic. This can be small or large depending on the type of hook you plan to use.

draw cutting lines

Step 5

Use an X-acto knife to cut out the opening.

cut along lines

Step 6

Pour some white glue into a small container. Cut your fabric so it is an inch taller than your charging station and wide enough to wrap around it with a 1/4-inch overlap in the back.

pour glue into bowl

Step 7

Use the foam brush to apply the glue to the plastic.

paint glue

Step 8

Place the fabric over the front and wrap it around to the back, smoothing it in place. Leave a 1/2-inch over hang on the bottom edge and overlap a 1/4-inch of fabric on the back.

place fabric over glue turn over and glue fabric

Step 9

Cut slits in the bottom 1/2-inch fabric overhang every 1/2 inch or so. Cut them right up to the bottom of the plastic.

cut slits in fabric on bottom

Step 10

Paint the bottom edge of the plastic with glue and fold over the bottom fabric, overlapping the cut fabric to fit. Let it dry overnight.

fold over fabric and glue

Step 11

When the glue is dry, trim the excess fabric from around the entire charging station with sharp scissors. Use an X-acto knife to trim the fabric from the opening.

trim extra fabric trim extra fabric

Attach a hook to the wall and charge your phone in your now clutter-free space.

finished phone charging station finished phone charging station